What Is Carbon Coil/Sheet?
Carbon Coil/Sheet is a long strip of metal that can be shaped into different sizes and shapes. They’re strong and durable and can be used in a variety of applications.
Fabricators who utilize flat-bed lasers often choose to purchase their sheet metal in coil form. This cuts down on cost, storage space and labor.
1. Strength
Carbon steel coils are extremely durable and provide the strength necessary to build long-lasting structures. They are also highly sustainable, helping to reduce building waste and conserving energy. Additionally, carbon Carbon Coil/Sheet steel is one of the most recycled materials in the world, and when it is used in building projects, it helps to promote a more sustainable construction industry.
High-quality carbon coils are available in a wide range of grades, widths, and thicknesses to support almost any manufacturing project. For example, cold rolled carbon coil can be used in the production of gears, screws, and bolts for busy machinery that requires hardware components to stand up to heavy use. It can also be used to manufacture storage containers that will protect contents for decades.
The type of carbon steel needed for a specific application will ultimately determine what grade of carbon coil is appropriate. For instance, low-carbon steel contains only a small amount of elements other than iron, silicon, manganese, sulfur, and phosphorus, and is ideal for applications that don’t require the highest level of material quality.
In addition to the grade of steel, fabricators must also choose the right finish for their carbon coils. For example, some may need to be galvanized or aluminized in order to meet the requirements of their fabrication processes and protect them from moisture and other harsh environmental conditions. Tolerances are another important factor to consider, as tighter tolerances will provide greater precision and consistency for the final product.
2. Durability
Carbon steel coils are known for their superior durability, allowing them to withstand strong loads and remain stable over time. This makes them ideal for a wide range of applications, including automotive manufacturing, aerospace, electronics, construction, and mechanical manufacturing. They are also often used as a raw material for various metal products, such as steel pipes and steel plates.
The durability of carbon steel can be enhanced through various treatments and coatings. These can improve corrosion resistance, paint adhesion, and overall durability. In addition, many carbon coils are available in a variety of thicknesses and gauges to meet specific application requirements.
American Douglas Metals offers high-quality carbon steel coils in a large product inventory that can be customized to your exact project specifications. Our global sourcing can provide a wide array of sizes, grades, widths, and thicknesses, all in a variety of finishes.
We can provide a range of carbon steel coils in either cold-rolled or hot-rolled form. Cold-rolled steel is produced by removing rust from hot-rolled sheet metal through pickling in a weak acid solution, washing, carbon steel manufacturer brushing, drying, oiling, and finally performing cold-rolling to achieve a finer surface finish. In contrast, hot-rolled steel is brought to its approximate final thickness through rolling at elevated temperatures. Camden Yards Steel also carries diamond plate/floor plate, hot-rolled pickled and oiled (HRP&O), and galvanized carbon steel coils to serve your needs.
3. Versatility
When working with carbon steel, fabricators can create custom coil/sheets to meet the needs of a variety of industrial applications. All Foils stocks alloys 1008 and 1010 carbon steel foil and light gauge foil sheeting that are very conductive and formable, allowing them to be used across industries such as automotive, aerospace, military and commercial engineering, electronics and electrical. For companies that want to take advantage of this versatility, investing in a cut-to-length line allows them to produce laser-quality sheets in-house for a fraction of the cost of purchasing them from the market.
When purchasing carbon coils, it’s important to understand the difference between cold and hot rolled products. This is because your intended end use will ultimately determine which type of product is best for your purposes.
Hot rolled steel is instantly recognizable by the bluish-tinge scale that covers it, which is actually iron oxide. This is a result of the chemical reaction that takes place during the production process, and makes it ideal for second grade applications that don’t require high standards of surface finish.
However, if you need a more durable, longer-lasting steel solution that’s also able to resist corrosion, then consider high-strength low-alloy (HSLA) steel. This type of metal has a higher yield strength and toughness, allowing it to handle greater stress than regular commercial grades. It is also more resistant to corrosive environments, making it an excellent choice for structures that will be exposed to marine conditions or chloride solutions.
4. Customization
The process of transforming carbon coil into a metal product that fits your needs can be accomplished in a number of ways. From shearing, slitting, and cutting to length to annealing, pickling, galvanizing, and pre-painting, modifying a cold-rolled steel coil allows for customizing potential that can save you time, money, and resources.
Many contractors who fabricate standing seam metal roof and wall systems depend on coil manufacturers to supply them with the best material available. This is because they are essentially paying for the convenience of being able to purchase their materials in bulk, which on average can save them 15 percent. However, some of the lowest-cost suppliers may be cutting corners, including skimping on quality assurance and sourcing low-quality material.
For example, the coating system that’s applied to the metal could be cheap or low-quality. In the architectural standing seam industry, PVDF (polyvinylidene fluoride) resins such as Kynar 500 and Hylar 5000 offer the most longevity in terms of color retention, durability, oxygen, water, and pollution particle resistance. It’s critical to watch out for businesses that falsely advertise their coil as PVDF when it might actually be coated in a cheaper plastisol, polyester, or FEVE resin.
Additionally, if the metal hasn’t been tested for use in engineered panel profiles, it can cause issues when running through your equipment and resulting in panels that aren’t up to standard. Working with a reputable supplier that adheres to the highest standards in manufacturing will ensure your customizing is done right the first time.