Waterproof Wago Connectors
Moisture can form quickly and wreak havoc on electrical systems. It is particularly dangerous in junction boxes, where it can trigger a short circuit.
To prevent this, the new waterproof wago connectors rely on the proven encapsulation technology of Cellpack-brand gel. This has several advantages over conventional potting compounds, including easy re-accessibility and standards-compliant expansion of existing wiring installations.
Compact design
Waterproof wago connectors are among the most popular components in building installations for junction box connections. The lever-actuated splicing connectors from WAGO are characterized by their particularly compact design – up to 40 % smaller than their predecessors. They are easy to handle and provide electrical engineers with a simple and space-saving solution for expansions and multiplications in distribution cabinets. The splicing connectors are available with matching mounting carriers for clear organization and labeling in distribution boxes.
Moisture is one of electricity’s biggest enemies, because it can cause a waterproof wago connectors short circuit within a very short amount of time. This is especially the case during transitional periods when warm air from indoors meets cold housing wall and condensation forms.
The new waterproof wago connectors from WAGO with Gelbox offer reliable moisture protection for all multi-wire lever-nut splicing connectors. The waterproof wago connectors are prefilled with a non-hazardous, silicone-free gel and seal immediately after insertion. They can be reopened again at any time for rewiring, and are suitable for indefinite storage.
The WAGO splicing connectors with Gelbox also meet the stringent requirements for use in households, and are therefore approved according to EN 60998. This approval is based on an independent test of the product and ensures that the splicing connectors can be used safely and reliably in households.
Easy rewiring
When it comes to reliable moisture protection for lever-actuated splice wire connectors, the WAGO Gelbox is an ideal solution. It is pre-filled with non-hazardous, silicone-free gel and seals the connection immediately – eliminating the need for time-consuming mixing of sealing compounds. Additionally, it is suitable for indefinite storage. This means that electrical systems can be deployed right after installation without interruption – quickly, easily and reliably.
This is particularly valuable in distribution cabinets, where the space available is limited and electricians need to save every millimeter. WAGO also offers a matching mounting carrier for its 221 series compact splicing connectors that can be snapped onto DIN-rail or screwed to a smooth surface. The carrier can be clearly marked with marker strips and makes it easy to identify the wiring configuration. This helps meet the VDE requirements for accessibility, identification and inspection of conductors in distribution cabinets.
The WAGO 221 series splicing connectors have a compact design, making them 40 % smaller than the 222 series and further reducing space inside junction boxes. They are ideal for connecting solid or stranded conductors and can be used in a variety of applications including door and window sensors, motors for sunblinds and roller shutters, heating controls and lighting. They are also code approved for use in damp and wet environments.
Easy installation
One of the biggest challenges waterproof crimp connectors when it comes to electrical wiring is avoiding moisture penetration. Water can cause significant damage to electrical systems and may even result in a fire. That’s why electricians need to take all possible precautions.
Luckily, WAGO offers several solutions that allow users to protect their connections against moisture. The new gel box, for instance, encloses the used terminal block in a cushion of polyurethane gel and makes it impossible for water to penetrate it. This innovative technology helps ensure the safety of electrical installations and protects against expensive repairs and downtime.
The WAGO Gelbox is a compact box pre-filled with silicone-free waterproofing gel and provides reliable IPX8 moisture protection for WAGO’s lever-nut splicing connectors. The Gelbox is available in various sizes and enables electricians to easily install multi-wire splicing connectors for lighting, heating controls, door or window sensors, motors and fans. The splicing connectors can be used together with WAGO’s 2273 Series COMPACT push wire connectors or with other WAGO products with spring clamp connection.
The Gelbox is made from Cellpack-brand gel, which is known for its quality and reliability. Unlike conventional potting compounds, it is completely silicone-free and can be stored indefinitely. Additionally, it allows splicing connectors to be re-accessed without the need for removal of the carrier or the splicing connector itself. This allows for simple identification of conductors and easy maintenance, inspection and testing according to VDE standards.
Reliable moisture protection
Moisture in electrical circuits is a leading cause of short-circuits. Whether it’s condensation, heavy rain or powerful water jets, this moisture can change the current paths and lead to dangerous accidents. Thankfully, waterproof electrical connectors help to prevent this from happening by keeping water out of the junction box.
The waterproofing of electrical connectors is accomplished with a special gel. This gel has been co-developed with WAGO and offers three major advantages over conventional encapsulation. First, it is silicone-free. This is important because it allows the Gelbox to be used in any branch of industry where varnishes, paints and other silicone-sensitive products are used. It also saves time because it does not need to be mixed and is ready for use immediately. Finally, it can be stored indefinitely, which is not possible with standard potting compounds.
WAGO’s Gelbox for 221 Series compact splicing connectors is easy to install and offers reliable moisture protection. This is achieved by placing the splicing connectors inside the Gelbox, which wraps itself around the installation and seals it immediately. The Gelbox is also able to be re-opened for any future rewiring. This is a huge advantage over traditional encapsulation, which can be difficult and slow to open. It is also easy to fit the Gelbox into any junction box, irrespective of its size.