Menu Close

Waterproof Low Voltage Wire Connectors For Irrigation and Landscape Lighting

waterproof low voltage wire connectors

Waterproof Low Voltage Wire Connectors For Irrigation and Landscape Lighting

Protect landscape lighting and irrigation connections from the elements with high quality waterproof low voltage wire connectors. VOLT offers an array of durable, professional-grade landscape lighting wire connectors by trusted manufacturers such as Blazing and King Innovation.

The IDC Run or Tap electrical connector is used to electrically tap into a wire in mid-span without cutting or stripping the insulation. This connector comes pre-filled with insulation sealing grease, is waterproof and moisture-proof and approved for direct burial applications.

Gardenreet Waterproof Connectors

Landscape lighting circuits are exposed to weather and other elements, making it vital that all of the connections be properly waterproofed. If even a single connector isn’t sealed well enough, moisture can sneak into waterproof low voltage wire connectors the system and cause a short. This can ruin the beauty of your lighting set-up, leaving your customers in the dark.

Luckily, there are many options to choose from when it comes to waterproofing wire connectors. Some of them work by piercing the main wire with a pin and sealing it with a cap, while others use a screw or push mechanism. It’s important to make sure you select a waterproof sealant that isn’t acidic, such as an alkoxy sealant. Acetoxy sealants release a vinegar-like smell as they cure, which can corrode the wire.

If you’re looking for a simpler way to waterproof your landscape lighting connections, consider using wire nuts that are already pre-filled with sealant. These are basically the same as standard wire nuts, except they’re ready to use right out of the box and are more reliable than push-in connectors, which can see the pins weaken and stretch over time.

Waterproof connectors also come in a variety of sizes to suit any landscape lighting installation project. From the smallest size to the largest, these wire connectors will help you keep your customers’ lights shining brightly and stay protected from moisture.

Twist Locking Waterproof Connectors

The central barrel-shaped connector on these waterproof cord connectors has a metal conductor running through it that contacts the ends when you screw them together. This is similar to the way that a Posi-Lock connector works, and it makes the connection really solid. The ends of the wires to be connected need to be stripped first.

You can connect up to 2 different wires with a single push-in connector, which is very convenient compared to twist-on connections that require you to remember or reference a combination chart. These push-in wire connectors are also dust and waterproof, which is great for use in law enforcement field work or other applications where equipment is exposed to a lot of abuse. They also come with a stylish cord cover and ring to keep contaminants out of the connections.

SnapLoc Waterproof Connectors

Waterproof low voltage wire connectors for irrigation and landscape lighting that are safe, fast and reliable. These clear and yellow 1.922″ x 1.522″ silicone filled snap connections are rain-tight, air-tight and waterproof. Designed for professional irrigation and landscape lighting contractors, they are easy to install and use. Just remove the molded cover, strip the wire, insert and snap shut. The pre-filled silicone fully encapsulates bare wires, closing all entryways against moisture and corrosion, while the dual O-ring seal bars water from creeping in. They never dangle, are vibration proof and can be removed or reinstalled easily. UL listed and CSA certified.

King Industry Waterproof Connectors

Waterproof electrical connectors are a valuable accessory to any outdoor or harsh-environment application. They prevent moisture from seeping into electrical connections, which can cause corrosion and lead to system failures. Depending on the industry, electrical connectors can waterproof 3 way wire connector be exposed to moisture from rain and snow, humidity, or pressurised water for cleaning purposes.

Compared to standard electrical connectors, waterproof ones have robust housings and sealing mechanisms, which create a protective barrier from moisture. They are also designed to withstand temperature variations and other environmental conditions, which makes them a reliable choice for wet or harsh environments.

In addition, waterproof electrical connectors are easy to install and maintain. Many models have user-friendly locking mechanisms or snap-in designs, which help reduce installation and maintenance time. Some even have color-coded indicators or keying options, which ensure error-free installations. This reduces downtime, allowing technicians to focus on other tasks and increase productivity.

Unlike other connectors, which require heat shrink, caulking, and tape to be weatherproof, these waterproof connectors are ready for use right out of the box. They are pre-filled with a long-lasting dielectric silicone sealant that protects against the harshest outdoor elements. This eliminates the need for costly and time-consuming steps, saving money in the long run. Additionally, their sealed nature helps reduce the need for frequent cleaning and maintenance, further reducing costs.