Whole House Water Filter System For Home

If you want the peace of mind that comes from knowing your entire household’s water is clean, a whole house system is worth considering. These systems typically cost more upfront, but require minimal maintenance and offer high-level filtration that goes beyond what under sink and pitcher models can do.

Reduces chlorine taste and odor, dirt, rust, scale, and more for a budget friendly price. Check out the filter capacity to ensure it will be able to handle your household demands.

Pre-Filter

Pre-filters are designed to catch larger particles that would otherwise clog a filter, including hair and pet dander. They are often found as a part of 3-in-1 filters, where they’re connected to both a carbon and HEPA filter. This type of pre-filter is easy to maintain and can go a long time before needing to be changed.

A pre-filter is a vital component in any liquid filtration or treatment system. Insufficient or improper pre-filtration can have devastating consequences. One example is the water crisis in Flint, Michigan, which resulted from poor filtration. The city’s switch from Detroit Lake water to the Flint River introduced higher levels of lead and bacteria to the system. Several factors contributed to the crisis, but inadequate pre-filtration is a major one.

When large debris is captured by pre-filters downstream clogs and pressure drops are eliminated, leading to improved fluid product quality and system efficiency. The right pre-filtration will also improve system safety, increase production capacity, reduce downtime, and more. It will also help ensure adherence to regulatory requirements and standards, minimize waste, and reduce environmental impact. The best pre-filters are made main water filter system for home with highly efficient borosilicate glass microfibre media supported by a stainless steel or polysulphone/polypropylene spunbonded layer.

Post-Filter

As the name implies, a post-filter captures impurities after your pre-filter does its job. These are generally smaller particles, such as silt, rust or other organics, that might have not been caught by your pre-filter. Think of the post-filter as a polishing agent that reduces the amount of sediment and organics left behind in your water.

Our efficient high capacity PAC filter reduces major water impurities such as Chlorine, Total Organic Carbon (TOC), Pharmaceuticals, Turbidity and Volatile Organic Chemicals (VOC) leaving your home with great tasting, pure water for all your household uses. This 10″ PAC Filter is compatible with all Aquasana Whole House Systems including UV and Purifiers.

This post carbon filter is made up of high-quality activated carbon that significantly reduces chlorine taste and odors in your water. It is designed to be used in conjunction with Watts Premier RO Pure and Watts Zero Pure Reverse Osmosis Systems. This 5 micron post carbon filter is recommended to be replaced once a year.

Activated Carbon

Activated Carbon attracts and holds organic chemicals from liquid or gas streams in a process called adsorption, allowing these contaminants to be separated from the solution. It is an invaluable tool that has been in use for millennia and can be found in everything from hospitals to reduce odors and keep medical equipment clean, to old sailors using it to treat water in their barrels to prevent illness while at sea.

There are many different types of activated carbon available for a variety of applications, including drinking water purification, industrial vapor control and pollution control. It is produced from carbonaceous source materials, such as coconut shells, nutshells, peat, coal or wood, which are then ground into particles and activated in high-temperature kilns.

Once the activation is complete, the resulting carbon can be used as-is or impregnated with chemicals to meet specific requirements of a given application. For example, chemically impregnated carbons are used to treat flue gases in power generation plants to remove acid flow water system gases (ammonia and amines), aldehydes, radio-active iodine and mercury from air.

Generally speaking, the most common form of activated carbon you will find is in the form of granulated, or GAC. This type of carbon is made from solid pieces of carbon that are pulverized to create a powder-like product with a wide range of sizes that can be easily screened and dusted.

Filter Housing

Filter housings are cylindrical or rectangular-shaped containers made from materials such as stainless steel and polypropylene. They feature inlet and outlet ports for fluid to enter and exit the filtration process, and a filter cartridge or bag that traps and removes contaminants from the fluid as it passes through. They are often fitted with a gasket that establishes an airtight seal and prevents bypass of unfiltered material. They also have a closure mechanism such as a clamp, bolt, or quick release system.

There are various types of filter housings available to meet the specific needs of different processes and environments. Some have a capacity that is suitable for high flow rates, while others are designed to withstand low pressure rates and a wide range of operating temperatures. Some are even capable of surviving harsh environments with high levels of corrosion.

Some filter housings come with a backwash valve and drain to wash away contaminants that adhere to the surface of the filter cartridges. This allows the filter to continue operating uninterrupted while the cartridges are being washed. This is particularly useful in industrial applications, where it is important that the filtration process not be interrupted for any length of time. The quality of a filter housing is typically determined by its ability to cope with the required working temperature and pressure, as well as by its structural integrity.