Waterproof Bulkhead Connectors
Rigid waterproof bulkhead connectors are used in a wide range of applications, from marine electronics to industrial networking equipment. These connectors help keep devices working properly in harsh environments and are resistant to vibration, shock, and extreme temperatures.
These waterproof connectors come in a variety of sizes and configurations to suit a wide range of applications. They are typically color-coded to make it easier to identify connections. They also protect against moisture and dust.
High insulation resistance
The insulation resistance of waterproof bulkhead connectors is important because it prevents electrical current from leaking through the connector. If this occurs, the connection can fail, causing a short circuit. This can lead to equipment failure, which could jeopardize safety and put people at risk. It is also essential to choose a bulkhead connector with high insulation resistance in wet or humid environments.
Waterproof bulkhead connectors are used in marine, automotive, industrial, and outdoor applications. They protect against environmental factors, such as saltwater and vibration, that can damage electronics. Choosing the right waterproof bulkhead connector for your application can help extend the life of your equipment.
AMETEK’s hermetic PB series bulkhead connectors are available in a wide range of interface options, including RF types (BNC, TNC, N-type, and SMA), rectangular (D-subs and rack & panel styles) and circular (MIL-Spec and commercial equivalent style push-pull and M). These rugged feedthroughs are designed to be used at low-to-moderate pressures and temperatures and can be disconnected without losing their hermetic seal.
Kemlon offers a wide variety of glass waterproof bulkhead connectors sealed feedthru connectors, ranging from polyether to glass bonded ceramic to all-ceramic. All of these models have been fabricated to meet a minimum helium leak rate of 10-8 cc/sec. These ratings are based on the results of tests using a mass spectrometer helium leak detector.
Easy to install
Waterproof bulkhead connectors can be easily installed in a number of applications. They can be used for outdoor security camera systems, marine equipment, or any other application that requires Ethernet connectivity in a harsh environment. These connectors are also resistant to vibration, temperature extremes, and other environmental factors that can damage networking equipment.
Most waterproof bulkhead connectors have a keyed design, making it impossible for the pins to be accidentally mated in the wrong position. This feature is especially useful for industrial and military applications. They are also designed to be dry-mated underwater, providing protection from abrasion and corrosion. This makes them an ideal choice for oceanic and submarine applications.
Using a waterproof bulkhead connector is fairly simple, and most can be installed by simply sliding it into the hole in the panel. The wires can then be crimped and soldered in place. Once the crimping is done, the wires can be pushed into the back of the connector, and it will snap into place.
For easy routing of cables, bulkhead connectors have a wall-hugging low profile design that keeps them close to the surface, reducing interference with personnel or other equipment. The molded nylon design also prevents sharp edges that could cause injury. The waterproof seal is accomplished with a silicone compression ring on the base piece and a sealing end cap. Several models are available to accommodate different cable diameters. Stock connectors and cables typically ship in 2-3 days, while custom items or large orders can take 1-2 weeks to ship.
Easy to disassemble
The first step in disassembling a waterproof bulkhead connector is to remove the ground stud and positive stud. These are held in by 10mm bolts, so you’ll need a wrench and possibly a socket to get them loose. Once they are removed, the rest of the connections can be disconnected and the whole thing can be pulled out.
You can buy replacement terminals for the bulkhead connector, but I recommend you use silicone-based grease when installing them. It’s easy to find and it works very well with the O-rings on these types of connectors. It’s also important to make sure the wire gauges you’re using are compatible with the size of the pins in the connector. If you’re trying to use a larger gauge of wire on a smaller-sized pin, you may run into problems later when it comes time to disassemble the connector.
The Glenair Series 802 insulated wire, panel mount receptacles are designed to withstand extreme conditions. They feature a marine bronze shell, Viton O-rings, and 316 stainless steel. They can withstand exposure to corrosive chemicals and temperatures up to +300degC. They also have high-density crimp Mighty Mouse inserts and an integral shield termination platform. This type of connector is often used for logging while drilling (LWD) and measurement while drilling (MWD) applications. They are also used in oil and gas pipeline inspection equipment.
Wide range of applications
In the world of encapsulated machinery and equipment, reliable electrical outdoor waterproof wire connectors connections are imperative. They need to be able to withstand challenging environmental conditions, and they must be easy to maintain. This is where VELLE’s waterproof bulkhead electrical connectors come into play. VELLE’s commitment to delivering quality, durable connectors means they can be used in a wide range of applications.
For example, automotive manufacturing uses a lot of encapsulated machinery that requires the use of fluids like coolants and oil. If these machines fail due to poor electrical connections, it could lead to costly production downtime. By using waterproof bulkhead connectors, the automotive industry was able to keep their machines running smoothly.
Waterproof bulkhead connectors are also used in industrial settings for connecting devices that require high temperatures and humidity. They are also resistant to vibration and chemical exposure, making them perfect for outdoor networks and industrial automation systems.
Bulkhead mount connectors are available in a variety of connection interfaces including RF types (BNC, TNC, and N-Type), circular types (MIL-Spec and commercial equivalent styles, push-pull styles, and M style), rectangular types (D-subs and rack & panel) and others. They are available in both hermetic and non-hermetic versions, and you can choose the type that best suits your application based on the degree of protection required. Many bulkhead connectors have an IP rating that lets you know how much water or dust the connector can withstand, with protection levels ranging from IP00 (no protection at all) to IP68 (submersion in water for prolonged periods). This helps to ensure your equipment stays safe from pesky invaders.