Waterproof Bulkhead Connectors
Waterproof bulkhead connectors are crucial to automotive, marine, and industrial electrical systems. These connectors can withstand harsh environmental conditions like heat, vibration, and dust. They are also necessary for outdoor applications like lighting and security systems.
They are easy to install and disconnect, and provide a hermetic seal. These connectors are available in a wide variety of sizes and materials.
They are designed to withstand harsh conditions
A waterproof bulkhead connector is a key component in marine electronics. It’s designed to withstand harsh conditions like saltwater, sunlight, and rain to keep electrical components operating properly. These connectors are also used in automotive and industrial settings to connect motors, sensors, and other devices.
The waterproofing capabilities of a bulkhead connector depend on a number of factors, including its IP rating and seal. The IP rating is a system that measures the ability of the connector to resist dust and water ingress. The higher the IP rating, the more resistant the connector is to environmental contaminants.
For example, a series 22 geo-marine bulkhead feed-thru has high-density insert arrangements and advanced environmental sealing. These features make the product ideal for hostile marine and oil-patch applications. It is backfilled with epoxy potting compound and has piston seal nitrile O-rings to withstand exposure to corrosive chemicals.
Another option is the Micro WET-CON split series. This series is designed to provide the same performance as SEA-MATE’s rubber molded WET-CON connectors in a smaller form factor for space-constrained applications. It features a low-cost, hermetic design and a high density of inserts to minimize the need for costly Y-assemblies. It is available in a variety of interfaces and rated to 10,000 psi pressure mated. It’s ideal for use on Navy ships, oil platforms, and geophysical surveying.
They are easy to install
The waterproof bulkhead connector is a great way to connect wires from a panel to your vehicle. It is easy to install and disconnect, so it can be used in many different situations. These connectors are ideal for marine applications, industrial automation control, and even telecommunication. They are also used in automotive wiring and can be installed in the firewall.
Whether you are installing a new water tank or simply adding a bulkhead connector, it’s important to follow the proper procedure. The correct steps can mean the difference between a fitting that leaks your valuable stored waterproof bulkhead connectors resource and one that is sealed to last. A few basic tools and a stepwise process is all it takes to successfully place a bulkhead fitting on your poly water tank.
First, mark the location where the bulkhead will be installed. Many cylindrical poly water tanks have flat spots every 90 degrees around the tank, making them an ideal location for a bulkhead. Then, use a ratchet to cut the hole needed for the new fitting. After the hole has been cut, use a woodworking tool to make sure that the bulkhead fits snugly in the hole. The fitting’s flat backing and gasket should be covered by the hole for a secure seal.
Waterproof bulkhead connectors come in a wide variety of interface types, including RF (BNC and TNC), rectangular D-subs, rack & panel, MIL-spec, push-pull, and circular. They are also available in hermetic versions to prevent water ingress into your device.
They are durable
Waterproof bulkhead connectors are designed to withstand the elements. They can withstand heavy rain, extreme temperatures, and chemicals. This helps to reduce electrical issues and downtime. These connectors also have a long lifespan, reducing the frequency of repairs and replacements. This can result in significant cost savings.
Waterproof waterproof connectors are often used in marine buoys, some ship navigation equipment, and sewers. They are also used in robotic underwater vehicles (ROV or AUV) and seismic-evaluation and drilling instruments for oil & gas. These applications require high levels of hermetic sealing to prevent gas leaks over longer periods of time. They must also withstand immersion in liquids for extended durations. Fischer Connectors’ styles DEE, DBEE, DBPE, and others have hermetic seals and are 100% tested to ensure durability in demanding conditions.
Besides hermetic seals, waterproof bulkhead connectors have other features that make them durable. For instance, they are made of corrosion-resistant materials and have a stainless steel body. This makes them ideal for harsh environments and long operating hours. Moreover, they are easy to install and can be used in a variety of applications.
For more information on these waterproof bulkhead connectors, contact a specialist from Kemlon. They can provide a complete solution for your application, including design and testing. Their products can be rated up to 15,000 psi in both the unmated and mated states. They are ideally suited for offshore oil & gas, military/defense, oceanographic research and other harsh environment subsea applications.
They are easy to disconnect
One of the best ways to connect a cable to a component is by using a waterproof bulkhead connector. These are usually affixed to the enclosure through a nut, and the cable is then bonded to it using some kind of adhesive. This method of bonding is less permanent than direct bonding, but it still takes some work to remove the connection. This is especially true if the cable has been routed to a point that is difficult to access.
Several different kinds of waterproof bulkhead connectors are available. These include RF types (BNC, TNC, and N-Type), rectangular types (D-subs and rack & panel) and circular outdoor waterproof wire connectors types (MIL-Spec and commercial equivalent styles). They are also offered in hermetic and waterproof versions.
These connections are useful for many applications, including marine environments. They can be used to connect Ethernet devices on boats, ships, and offshore installations. They also offer protection against the saltwater and other environmental factors that can damage equipment.
For example, the Cobalt series dry-mate underwater connectors use 316 stainless steel shells and PEEK inserts to withstand long-term immersion in seawater. They can also be mated while under water, and can handle high currents. The underwater bulkhead connector also features a built-in water block that keeps the vacuum inside of the housing when using the AirLock Vacuum System.