Menu Close

Piped Drinking Fountains

Piped Drinking Fountains

Piped drinking fountains offer a convenient alternative to water dispensers and coolers by dispensing water through a small spout or bubbler. Any excess lands in the basin below and is drained away.

In recent years, some school fountains have tested high for lead levels. They have also been found to be hosts for rotavirus and influenza A germs.

Water Flow

When it comes to fountains, there are a lot of different options that can be installed. Some are just bubblers, some have spouts or jug-filling faucets and others have more elaborate designs with features like personalization and motion sensing bottle fillers. The newer fountains tend to be more efficient in terms of their water flow as well, which is good for the environment and also your utility bill.

For example, many of the newer fountains work with a carbon block filter to remove any chlorine taste that may be present. In addition, the newer fountains use a much more efficient pump which uses less energy to run. This is another great way to reduce your energy consumption on a commercial property which in turn is good for the environment and also your bottom line.

Another big trend in the pipeline drinking fountain market is the move towards reducing plastic waste. Many fountains come with a recycling station which helps to encourage people to bring their own reusable water Stainless steel water filter bottles rather than using disposable plastic ones. Some even offer a donation to a clean water project in developing countries for every bottle filled at the fountain.

One of the biggest challenges with a pipeline drinking fountain is getting it connected to the right plumbing systems. In general, all fountains need to be connected to a 3″ sanitary line at the fountain and then a 3″ overflow drain to sanitary sewer at the equipment room or vault. Some municipalities allow you to connect the overflow to storm, but you will need to check with your civil engineer on the requirements for your specific project.

Water Temperature

Drinking fountains are generally placed in public spaces like schools and parks where they can be easily accessed. They provide a convenient way to drink water without having to bring your own bottle or find a cup. They also help to eliminate the need for disposable cups and therefore reduce waste.

Often, the temperature of water at drinking fountains varies depending on the location and water treatment plant. Drinking fountains are directly connected to plumbing potable water and drainage systems, which may be at different temperatures. Excess water that is not consumed by users is piped straight to sanitary drain.

The temperature of drinking water at fountains also depends on the type of hydration system and a variety of environmental factors, including climate conditions. For example, it is known that microorganisms thrive at varying temperatures and that their growth can be influenced by the pH value of the water and the presence of organic loading and disinfectant residual.

In addition, the temperature of the transport mains is usually lower than that of the distribution system due to its larger diameter and shorter length. The transport mains are also installed below ground level, which means that there is a minimal heat exchange between soil and drinking water.

In order to protect the health of consumers, it is important that fountains are regularly cleaned. However, many school systems are limited on staff and fountains do not always make it to the top of their to-do list. As a result, some fountains can develop mineral buildup that leads to clogged pipes and unpleasant taste and color of the water.

Water Filtration

The spouts and handles on water fountains are commonly contaminated with a variety of germs. Some of the most common include norovirus (causing diarrhea) and influenza A, which causes a sore throat and fever. These viruses are a concern because the bacteria can easily spread from person to person.

Fortunately, fountains can be fitted with filters to reduce or eliminate these contaminants. In fact, the fountains in Sullivan’s school are connected to a series of complex filters that target potential contaminants by using three different methods. The first step removes metals and chemicals that may alter the taste of the water, followed by an ultraviolet light to kill any viruses or bacteria in the fountain’s spouts and basin.

Water filtration systems also extend the lifespan of a fountain by preventing clogging, which could cause expensive and untimely repairs. They can also prevent scaling and corrosion, which significantly improves water quality for the people who use the fountain.

In addition, filtered fountains provide an environmentally-friendly alternative to single-use plastic bottles, helping to reduce the staggering amount of plastic pollution that finds Pipeline water purifier its way into our oceans. In the end, fountains are a fantastic option for businesses that want to offer a sustainable choice that yields both short and long-term benefits while improving sustainability in their workplace environments. The right drinking fountains can make it easy for businesses to get on the green path to success.

Maintenance

Piped drinking fountains dispense water under pressure through a bubbler or spout that doesn’t require a cup. Excess water that isn’t consumed is piped directly to a sanitary drainage system. Drinking fountains can be used in indoor or outdoor environments. Adding a fountain to an environment is a great way to encourage students, employees or customers to stay hydrated. But it is important to keep in mind that fountains need proper maintenance to ensure a safe and hygienic environment.

In addition to regular cleaning, fountains should be flushed regularly with a solution of warm water and a mild soap. For most fountains, this will be sufficient to remove dirt and airborne contaminants. It is also important to clean the basin and any rocks or other items installed in the fountain. Fountains should not be turned off except for during cleaning as this can cause damage.

As part of routine maintenance, it is a good idea to change the filter in the fountain on a regular basis. This will keep the water crystal clear and help reduce residue build up in the fountain, extending its lifespan. Changing the filters is usually a simple process that can be done by someone on your team without any special tools. In addition to cleaning and filter changes, a fountain should be checked on a weekly basis for signs of leaks or other problems.